Audio & Video
CAT5e/6 Ext. Kit
USER MANUAL
Read this manual thoroughly, and follow the installation and operation procedures carefully to prevent any damage to the unit, and/or any of the devices connected to it.
VA-EXK Starter Kit:
(1)
(1) Receiver/Repeater Module
(2) DC 12v 1.2A Universal Power Adaptor
User Manual
VA-EXR RX Expansion Module:
(1) Receiver/Repeater Module
(1) DC 12v 1.2A Universal Power Adaptor
User Manual
[SOLID CAT5E IS REQUIRED. CAT6 IS RECOMMENDED]
OVERVIEW
Broadcast audio & video to multiple locations simultaneously using AV
In addition, the D/A Extender Kit can be daisy chained up to three levels to connect as many as 17 monitors and speakers, making it an excellent solution for public broadcast systems.
FEATURES
Economical A/V extender in wall mountable modules
Provides
TX also provides 4 expansion port
RX has
RX provides equalization and gain control
Works with flat panels, projectors and HDTV’s
Connect large monitors with HD15 input port
Supports VGA/UXGA up to 1600x1200 @ 60Hz
Cascade capability provides for future expansion
Compact design with shielded metal casing
One Year Limited Warranty
Note:
1.If you connect a DDC type monitor to
2.This designed for VGA/UXGA, and Multisync monitors. It is not suitable for CGA, EGA, or
3.For maximum performance, install it away from devices that produce high heat or electrical noise. Keep well ventilated.
RECOMMENDED CABLES
CC388MA Series - an HD15M/M triple shielded high quality video cable with audio to connect your computer to distribution amplifier/extender. It is available in standard lengths of 3, 6, 10, 15, 25, 35 & 50ft. (Must be purchase separately.)
SPECIFICATIONS
Function | Specification | |
Cable Distance | 1,000ft max. | |
(D/A to Display) | ||
| ||
Max Resolution | 1600x1200 60Hz | |
Max Bandwidth | 150 MHz | |
Signal Type | VGA/UXGA, Multisync | |
Horizontal Frequency | 30 – 110KHz | |
Vertical Frequency | 56 – 85Hz | |
Operating Temperature | 5 – 40o C | |
Storage Temperature | ||
Humidity | 0 – 80% RH, | |
Housing | Metal |
INSTALLATION
1.Use a high density HD15 male/male video and 3.5mm audio cable (CC388MA) to connect the PC’s audio & video port to the
2.Use a high density HD15 male/male video and 3.5mm audio cable (CC388MA) to connect the display and speaker to receiver’s
3.Connect the TX module to the RX module using a solid CAT5e or CAT6 cable with T568B wiring termination.
4.Plug the power adaptors into an AC source
5.Turn on the monitors and the PC.
6.Adjust Gain (brightness) and EQ (cable equalization) as needed.
DISTANCE RESOLUTION MATRIX
Please use the listed resolution matrix as a guide for setting the monitors. Some results may vary depending on the frequency,
type and size of displays. |
|
|
Up to 1600 x 1200 @ 60Hz | Up to 330ft | |
Up to 1280 x 1024 @ 60Hz | Up to 395ft | |
Up to 1024 x 768 | @ 60Hz | Up to 590ft |
Up to 800 x 600 | @ 60Hz | Up to 660ft |
Up to 640 x 480 | @ 60Hz | Up to 1,000ft |
DAISY CHAINING
Connect additional RX modules to an existing RX module’s CAT5