Rackmount Solutions E1500RM1U, E1000RM1U, E700RM1U manual Epo

English

(These items may require optional software or hardware)

Function	Factory	User Choices	Description
	Default
UPS ID	Enterprise 1U	Up to 64	Use this function to uniquely
	RM Series	characters	identify the UPS in your network
		to define	configuration
		the UPS
Battery	Date of	Date of battery	Enter the current date when
install	manufacture	replacement -	replacing batteries
date		month/day/year
		XX/XX/XXXX
Battery	1826	Up to 5	At first battery replacement, reset
life in		characters	to reflect actual number of days
days
			experience in your environment or
			leave factory default
Enable/	Enabled	Enable	When enabled, the UPS will
Disable		or	automatically restart from a low
auto		Disable	battery shutdown when normal AC
restart			returns
Set	Enabled	Enabled, at	Enabled - the UPS will emit a
audible		low battery,	short beep when in the battery
alarm		disabled	mode. At Low Battery the UPS
state			will emit two beeps from low
			battery warning until shutdown.
			Disabled - Use only when software
			is controlling the UPS or to
			silence the alarm
Shut-	Entire UPS	Entire UPS or	Entire UPS - Turns off the entire
down		UPS output	UPS.
Type			UPS Output - Turns off the UPS's
			output receptacles only.
Set	120VAC	120, 127VAC	Changes output voltage for bat-
inverter			tery mode operation
output
voltage
Enable/	Disabled	Enable	Enabled - the UPS will be
Disable		or	completely powered off and re-
EPO		Disable	main off until the UPS is reset

22