Listening Safely
To protect your hearing, follow these guide- lines when you use headphones.
•Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable level.
•Do not listen at extremely high volume levels. Extended
•Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing.
ˆCare
To enjoy your PA Amplifier for a long time:
•Keep the PA Amplifier dry. If it gets wet, wipe it dry immediately.
•Use and store the PA Amplifier only in normal temperature environments.
•Handle the PA Amplifier gently and carefully. Do not drop it.
•Keep the PA Amplifier away from dust and dirt.
•Wipe the PA Amplifier with a damp cloth occasionally to keep it looking new.
Modifying or tampering with the PA Amplifi- er’s internal components can cause a mal- function and might invalidate its warranty. If your PA Amplifier is not performing as it should, take it to your local RadioShack store for assistance.
REPLACING THE FUSE
If the amplifier does not operate, you might need to replace the fuse on the back of the amplifier with another
Important: Let the amplifier cool down and see if it starts again before you assume a fuse needs to be replaced.
Caution: Do not use a fuse with ratings other than those specified. Doing so might damage your amplifier.
1.Unplug the amplifier from the AC outlet.
2.Turn the fuse holder cap on the back of the amplifier in the direction of the arrow, then pull out the cap to remove the fuse.
3.If the fuse is blown, replace it. Use only an identical fuse with the proper rating. The fuse must be 7 amps.
Insert the fuse into the fuse holder’s socket, press the fuse holder back into the amplifier, then turn the fuse holder’s cap clockwise to tighten it.
Care | 9 |
