12-934

AM/FM stereo headset radio

Thank you for purchasing your AM/FM Stereo Headset Radio from RadioShack.

battery

compartment

NOTE: Actual product may vary from the images found in this document.

AM/FM Stereo Headset User’s Guide

Please read this user’s guide before

installing, setting up and using your new product.

www.radioshack.com

©2005. RadioShack Corporation.

12-934

All rights reserved. RadioShack and

RadioShack.com are trademarks

02A05

used by RadioShack Corporation.

Printed in China

Your headset requires one AAA battery (not included, available at RadioShack or online at www.radioshack.com). When the sound weakens, replace the battery.

1.Open the battery compartment cover. Replace when finished.

2.Place the battery in the compartment as indicated by the polarity symbols (+ and –).

battery notes

Dispose of old battery promptly and properly. Do not burn or bury it.

Use only a fresh battery of the required size and recommended type.

If you do not plan to use your radio for a month or longer, remove the battery. Batteries can leak chemicals that can damage electronic parts.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult your local RadioShack store or an experienced radio/TV technician for help.

If you cannot eliminate the interference, the FCC requires that you stop using your equipment. Changes or modifi cations not expressly approved by RadioShack may cause interference and void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. For complete warranty details and exclusions, check with your local RadioShack store.

RadioShack Customer Relations

 

300 RadioShack Circle, Fort Worth, Texas 76102

04/04

using the radio

Adjust the head band.

POWER OFF/ON

BASS BOOST OFF/ON

VOLUME

Rotate to adjust volume.

FM/FMST/AM

Switch to select band.

AM/FM Tuner

Rotate to select station.

listening safely

To protect your hearing when using your headset radio, set the volume to the lowest setting before you begin listening. Then, adjust it to a comfortable level. Wearing headphones while driving a car or riding a bicycle can create a traffic hazard and can be illegal in some areas.

caring for your radio

Keep the headset dry. If it gets wet, wipe it dry immediately. Use and store the headset only in room temperature environments. Handle the headset carefully. Do not drop it. Keep the headset away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

Page 1
Image 1
Radio Shack 12-934 warranty AM/FM stereo headset radio, AM/FM Stereo Headset User’s Guide

12-934 specifications

The Radio Shack 12-934 is a compact and versatile digital multimeter designed for both professionals and hobbyists in the fields of electronics and electrical engineering. Known for its user-friendly interface and solid build quality, the 12-934 is an essential tool for anyone needing accurate measurements in a variety of settings.

At the heart of the 12-934 multimeter is its ability to measure multiple electrical values. It has a comprehensive range of measurement capabilities, including direct current (DC) voltage, alternating current (AC) voltage, resistance, and continuity. This versatility makes it suitable for a wide range of applications, from simple household projects to complex industrial tasks.

One of the standout features of the 12-934 is its large, easy-to-read LCD display. This ensures that readings are clear and legible, even in low-light conditions. The display also features a maximum reading hold function, which allows users to freeze the current reading for easier reference. This can be particularly helpful in intricate electrical work where precise readings are crucial.

The device is equipped with an automatic range selection feature that simplifies the measurement process. This means that users do not need to manually select the range for voltage or resistance measurements; the multimeter does it automatically, reducing the chances of errors and making it more user-friendly.

Another key characteristic of the Radio Shack 12-934 is its built-in safety features. It comes with overload protection, which prevents damage to the multimeter in case of high voltage inputs. Additionally, the device is designed to comply with relevant safety standards, ensuring peace of mind for users.

Portability is also a notable aspect of the 12-934. Its lightweight design and compact dimensions make it easy to carry around, whether in a tool bag or pocket. The included test leads are rugged and designed for versatile use, enhancing the multimeter's effectiveness in various environments.

Overall, the Radio Shack 12-934 multimeter combines essential features, advanced technology, and user-friendly designs, making it an excellent choice for anyone in need of reliable measurement tools. With its impressive specifications and practical functionalities, the 12-934 continues to be a popular choice for electronics enthusiasts and professionals alike.