AM/FM Cassette Car Stereo w/22 Watts x 2 Max Power | Faxback Doc. # 60663 | |
Installation | ||
Preparation
CAUTION: Improper installation can damage your stereo and other components in your vehicle's autosound system.
Before you install your stereo, read all the instruction's in this owner's manual. You should be able to answer all of these questions about your vehicle's electrical and sound systems:
Does my vehicle have a
Which terminal in my Vehicle's fuse box supplies power even when the ignition is turned off?
Which terminal in my vehicle's fuse box is for accessories?
How do I connect a wire to the fuse box?
Also, be aware that installation in your vehicle might require cutting or modifying your vehicle.
Place the stereo as close as possible to the selected mounting location. We recommend that you install the stereo by temporarily connecting it to ground and power, optional components, and your speakers. Then test the connections. Next, disconnect the stereo, mount it in your vehicle, and then reconnect it. The instructions in this manual are arranged in this order.
CAUTION: Be sure your speaker can handle 32 watts of power (16 watts per channel). Each speaker must have an impedance of at least 4 Ohms Your local RadioShack store carries a full line of speakers.
Setting the Shaft Spacing
The size of existing openings in the dash or installation kit determines the best spacing between the stereo's shafts (knobs).
The space between the shafts is preset to
Follow these steps if you need to change the shaft spacing.
