your vehicle.
IMPORTANT: To avoid damage to your stereo, CD changer and your vehicle's electrical system, you must follow the order of installation shown in this manual, including instructions for making connections and testing.
In addition to the supplied hardware kit, you need these items to install your CD changer:
Cable ties or electrical tape.
Isopropyl alcohol.
Choosing Mounting Locations
Choose locations for mounting the CD changer and its components where:
You can easily reach them.
Wires and cables will not interfere with the vehicle's pedals or other moving parts.
No component is directly in front of heating vents.
All wires and cables will reach their connection points.
Before attempting to mount the CD changer and its components, confirm that they will fit the selected mounting areas.
CAUTION: Be careful to avoid obstructions behind all mounting surfaces.
For the CD Changer
You can mount the CD changer horizontally or vertically in your vehicle's trunk, on the floorboard, or under a seat.
CAUTION: Do not mount the CD changer upside down.
Notes: The CD changer's mounting area must be at least 13 inches (33 cm) deep.
When you choose a mounting area for the CD changer, make sure it is close enough to the Audio Adapter's mounting area so you can
