IMPORTANT SAFETY INSTRUCTIONS

Read and Retain Instructions — Safety and operating instructions should be read prior to use. The safety and operating instructions should be retained for future reference.

Heed Warnings — Follow all warnings on the device and in the instructions.

Cleaning — Unplug this device from the wall outlet before cleaning. Clean only as recommended by the manufacturer. Clean by wiping with a cloth slightly dampened with water. Avoid getting water inside the device. Do not use liquid or aerosol cleaners.

Water and Moisture — Do not use this device near water (for example, near a bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool).

Accessories — Do not place device on an unstable cart, stand, tripod, bracket, or table. The device may fall, causing injury to a child or adult, and damage the device. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer

or sold with the device. Follow the manufacturer’s mounting instructions, and use a recommended mounting accessory.

Ventilation — Slots and openings in the cabinet provide ventilation, ensure reliable operation, and protect from overheating. Do not block or cover these openings, and do not place the device on a bed, sofa, rug, or other similar surface. Do not place the device in a built-in installation such as a bookcase or rack unless it provides proper ventilation as specified by the manufacturer.

Heat — The device should be situated away from heat sources such as radiators, heat registers, stoves, or other devices that produce heat.

Power Sources — Use this device with the power source indicated on its marking label. If you are not sure of your home’s power type, consult your appliance dealer or local power company.

Grounding or Polarization — This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If you still are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Power-Cord Protection — Route power-supply cords so they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, outlets, and the point where they exit from the device.

Non-use Periods — The device’s power cord should be unplugged from the outlet when it is to be left unused for a long period of time.

Servicing — Do not attempt to service this device yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Replacement Parts — When replacement parts are needed, use only parts specified by the manufacturer or parts with the same characteristics as the original part. Substitutions may result in fire or electric shock.

Safety Check — Upon completion of service or repairs, ask the service technician to perform safety checks to determine if the device is in operating condition.

Lightning — For added protection during a lightning storm, or when the device is unused for long periods of time, unplug it from the wall outlet. This prevents damage due to lightning and power surges.

Attachments — Do not use attachments not recommended by the product manufacturer as they may cause hazards.

Wall or Ceiling Mounting — The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

SAVE THESE INSTRUCTIONS

Limited Warranty

RadioShack warrants this product against defects in materials and workmanship under normal use by the original purchaser for ninety (90) days after the date of purchase from a RadioShack-owned store or an authorized RadioShack franchisee or dealer. RADIOSHACK MAKES NO OTHER EXPRESS WARRANTIES.

This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser.

Should a problem occur that is covered by this warranty, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store in the U.S. RadioShack will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor;

(b)replace the product with the same or a comparable product; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

RADIOSHACK EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED

Desktop Cassette Recorder

User’s Guide

14-1128

 

 

 

 

Thank you for purchasing your Desktop Cassette Recorder from RadioShack. Please read this user’s guide before installing, setting up, and using your new recorder.

 Power your Recorder

Insert 4 C batteries (not supplied), matching the marked polarity (+ or –) symbols.

or

Connect the power cord into the AC IN jack and the other end to a standard AC outlet.

Power Cord

 Insert tape

Press STOP/EJECT to open cassette door then insert tape with the recording or playback side facing up.

 Record

1. (Optional) connect an external microphone. Insert the microphone plug into the MIC jack.

2. Press RECORD to start recording.

3. Press STOP to end recording.

 Playback

1. Press REWIND or FAST-F to find the desired position.

2. Press PLAY to begin playback.

3. Press STOP to end playback.

Overloading — Do not overload wall outlets, extension cords, or other outlets. This can result in fire or electric shock.

Objects and Liquids — Never spill liquids or push objects of any kind into this device through openings, as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.

Carts and Stands — If the device is used with a cart or stand, the cart or stand should be a type recommended by the manufacturer. A device and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces cause the device and cart combination to overturn.

Damage Requiring Service — Refer servicing to qualified service personnel under these conditions:

*When the power-supply cord or plug is damaged.

*Liquid was spilled or objects fell in the device.

*If the device has been exposed to rain or water.

*If the device does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the device to normal operation.

*If the device has been dropped or damaged.

*When there a distinct change in performance.

WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD.

EXCEPT AS DESCRIBED ABOVE, RADIOSHACK SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RADIOSHACK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. You may contact RadioShack at:

RadioShack Customer Relations

 

300 RadioShack Circle, Fort Worth, TX 76102

04/08

www.radioshack.com

Protect the environment by recycling used electronics. Go to www.ecyclingcentral.com to find a recycle location near you.

What’s Included

Desktop Cassette Recorder

Power Cord

User’s Guide

Specifications

Track System

2-Track Monaural

Tape Speed

 

4.75 cm/s

Recording System

................

AC Bias

Frequency Response (@ ±6 dB)

................................

125 Hz – 6.3 kHz

Signal-to-Noise Ratio

35 dB

Wow and Flutter (WRMS)

...... 0.25%

Power Requirements ...

AC 120V, 60Hz

............................ or Four C Batteries

....... or DC 6V with optional adapter

Dimensions (HWD)

1.8×5.5×9.6 in

..............................

(47×141×246mm)

Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document.

Battery Notes

Dispose of batteries promptly and properly. Do not burn or bury them.

Use only fresh batteries of the required size and recommended type.

Do not mix old and new batteries or batteries of different types, capacities, or chemistries.

If you do not plan to use the recorder with battery for a month or more, remove the battery. Batteries can leak chemicals that can damage electronic parts.

Listening Safely

To protect your hearing, follow these earphone guidelines:

Set the recorder to the lowest volume before you turn it on, then

adjust the volume to a comfortable level.

Do not listen at extremely high volume levels. Extended high- volume listening can lead to permanent hearing loss.

After you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing.

Traffic Safety

Do not wear earphones or headphones while operating a motor vehicle or riding a bicycle. This can create a traffic hazard and could be illegal in some areas. Even though some earphones or headphones let you hear outside sounds, they still can present a traffic hazard.

Page 4

©2008. RadioShack Corporation.

09A08

Printed in China

All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.

14-1128 A

2144-920-0-01

Page 2
Image 2
Radio Shack 14-1128 specifications Limited Warranty, What’s Included, Specifications, Battery Notes, Listening Safely

14-1128 specifications

The Radio Shack 14-1128 is an exemplary model from the renowned electronics retail brand, designed specifically to meet the needs of hobbyists, engineers, and everyday users. Released during a time when consumer electronics were rapidly evolving, this compact device combines versatility with user-friendly features.

One of the standout characteristics of the Radio Shack 14-1128 is its multifunctionality. It serves as a digital multimeter, capable of measuring various electrical parameters, including voltage, current, and resistance. This device is essential for those working on electronics projects, as it allows users to troubleshoot and test circuits efficiently, ensuring accuracy in readings.

The Radio Shack 14-1128 boasts a clear and readable digital display that provides precise measurements in real time. This feature is particularly beneficial for those working in low-light conditions, as the easy-to-read numbers eliminate guesswork and enhance usability. Furthermore, the device includes a selection of measurement ranges, allowing users to adapt to different applications quickly.

In terms of technology, the Radio Shack 14-1128 utilizes advanced components to ensure reliability and precision. Its integrated circuit design is engineered for minimal interference and robust performance, which is especially critical for sensitive electronic measurements. The device also adheres to safety standards, including a built-in fuse for added protection against overloads.

Another significant feature of the Radio Shack 14-1128 is its portability. Lightweight and compact, it can easily fit into a toolbox or be carried around in a backpack, making it an ideal companion for fieldwork or remote projects. The durable construction ensures that it can withstand the rigors of regular use, providing lasting value.

Battery operation adds to its convenience, eliminating the worry of finding a compatible power source while on the go. The long-lasting battery ensures extended use, which is crucial for professionals conducting long testing sessions.

Overall, the Radio Shack 14-1128 combines practicality and advanced technology in an accessible package. With its precise measurements, user-friendly design, and robust features, this device stands out as an essential tool for anyone engaged in electronics, whether for personal projects or professional applications. Its legacy continues to resonate with users who appreciate reliability and performance in their electronic measurement tools.