8-IN-ONE REMOTE POWERED BY KAMELEON

SETTING THE TILT SWITCH

The RadioShack 8-in-One Remote contains a Tilt Switch that activates the display when the unit is moved. If desired, you can disable it so only pressing a key will turn on the display.

NOTE: Disabling the Tilt Switch can help conserve battery life.

DISABLING THE TILT SWITCH

1.Press and hold P until the bottom IR segment flashes twice. The program keys will appear:

2. Press below OTHER once. The Other programming screen will appear:

3.Using the number keys, enter 9 8 5. The The bottom IR segment will flash four times, confirming the Tilt Switch is disabled. The program keys will appear again.

4.Exit programming by pressing once. The display will return to the last-selected device menu screen.

ENABLING THE TILT SWITCH

1.Perform steps 1 and 2 of the previous section, Disabling The Tilt Switch.

2.Using the number keys, enter 9 8 5. The The bottom IR segment will flash twice, confirming the Tilt Switch is enabled. The program keys will appear again.

3.Exit programming by pressing once. The display will return to the last-selected device menu screen.

38Setting The Tilt Switch