OWNER’S MANUAL

SETTING THE FINDER RECEIVER

The RadioShack 8-in-One Remote comes with a Finder Transmitter that can be used to quickly locate the main remote if it is accidentally lost or misplaced. At the factory, the Finder Receiver (inside the remote) is set to wake up every few seconds, listen for a signal from the Finder Transmitter, and then emit an audible alert to pinpoint the location of the main remote. This is a great feature, but it does use extra battery power.If you do not plan to use the Finder Transmitter, we recommend turning off the remote’s Finder Receiver to conserve battery life.

DISABLING THE FINDER RECEIVER

1.Press and hold P until the bottom IR segment flashes twice. The program keys will appear:

2. Press below OTHER once. The Other programming screen will appear:

3.Using the number keys, enter 9 7 2. The The bottom IR segment will flash four times, confirming the Finder Receiver is disabled. The program keys will appear again.

4.Exit programming by pressing once. The display will return to the last-selected device menu screen.

ENABLING THE FINDER RECEIVER

1.Perform steps 1 and 2 of the previous section, Disabling The Finder Receiver.

2.Using the number keys, enter 9 7 2. The The bottom IR segment will flash twice, confirming the Finder Receiver is enabled. The program keys will appear again.

3.Exit programming by pressing once. The display will return to the last-selected device menu screen.

Setting The Finder Receiver 39