![](/images/new-backgrounds/1279123/27912315x1.webp)
Code Identification
Code Identification Feature
The Code Identification Feature allows you to identify the three digit library code stored under your device key. For example, if you want to find out what
1.Press and hold the CODE SEARCH button until the red indicator stays on. Release the CODE SEARCH button.
2.Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, and then stays lit.
3.Press and release the CODE SEARCH button. The red indicator blinks off.
4.To find the first digit for the code stored under the mode button you pressed in step 2, press each numeric key from
5.To find the second digit, repeat step 4. This time when the red indicator blinks off, this is the second digit.
6.Repeat step 4 again to find the third digit.
2.
1, 3.
4, 5, 6.
14
Using the Sleep Timer
The Sleep button accesses the sleep function of your TV if it has that feature. If it does not, you can enable the remote to turn off your TV after a period of 1 to 99 minutes, as shown below. The remote must be in TV mode to set a Sleep Timer. This feature works even if your TV does not have a sleep feature.
1.Press and release the TV Mode button.
2.Press and hold the SLEEP button until red indicator remains on (occurring after approx.
3.Release the SLEEP button.
4.Press and release the numeric buttons
5.Leave your Remote pointing towards the TV with an unobstructed path.
To cancel the Sleep Timer, press and hold the SLEEP key for
15