Radio Shack 23-416 Illus of 4.8 volt Battery pack connection, Illus of battery pack insertion

23-416.fm Page 6 Friday, August 6, 1999 3:08 PM

Notes:

•If the connector does not fit, turn it over and try again. Do not force it.

•To charge a 4.8-volt cord-connected battery pack, plug the small end of the supplied adapter cord fully into the battery pack’s connector. Then plug the adapt- er cord’s large end fully into the CHARGING JACK.

illus of 4.8 volt

battery pack connection

2.Insert the battery pack into the charger’s large compart- ment. Make sure that the battery pack makes contact with the voltage selector sensor and the two latches at the bottom of the compartment.

illus of battery pack insertion

Note: Do not insert a cartridge battery pack while charg- ing a cord-connected battery pack, otherwise, the cord- connected battery pack will not charge.

3.Plug the charger’s cord into a standard AC outlet. After a few seconds, the charger automatically selects the ap- propriate charging current and charging begins.

Notes:

•The CHARGE indicator lights when the battery pack is charging and automatically turns off when the battery pack finishes charging, and flashes if the battery pack

6