273-329

TM

13.5/30VDC • 1A

AC-to-DC Power Adapter

UsingYour Adapter

1.Plug the correct

size Adaptaplug onto the jack at the end of the adapter’s cord.

•If your device’s DC input jack is marked

, align TIP on the adapter’s jack with + on the Adaptaplug (shown).

•If the DC input jack is marked , align TIP on the adapter’s jack with – on the Adaptaplug.

wCAUTION: Be sure to set the correct tip polarity. Incorrect polarity can damage your device or the adapter.

2.Plug the Adaptaplug into your device’s DC input jack.

3.Set the adapter’s voltage switch to the correct setting.

4.Plug the AC adapter into an easily accessible power outlet located near the equipment.

Protect the environment. Go to E-CyclingCentral.com to find an electronic recycling center near you.

Cautions:

•If this adapter is not compatible with the voltage and current requirements of your portable device, it can result in PERMANENT DAMAGE to the device.

•Before using, consult the User’s Guide or the rating label on your device to make sure it requires 13.5 or 30 volts DC.

•The power adapter’s current (1A) must be equal to or more than the current needed by your portable device.

•Before charging cell phones, make sure the cell phone specifications are supported by this power adapter.

•Never operate the adapter if it has been damaged in any way. Do not disassemble it.

wWARNING: To prevent fire or shock hazard, do not expose the adapter to rain or other moisture.

wCAUTION: The total combined current for accessories plugged into this adapter must not exceed 1A.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

Modifying or tampering with your 13.5/30VDC 1A AC-to-DC power adapter’s internal components can cause a malfunction, which might invalidate its warranty and void your FCC authorization to operate it.

LimitedWarranty

Ignition L.P. warrants this product against defects in materials and workmanship under normal use by the original purchaser for ninety (90) days after the date of purchase. IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES.

This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or mainte- nance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a Ignition L.P. Authorized Service Facility; (c) consumables such as fuses or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser.

Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof of purchase date to the place of purchase. Ignition L.P. will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor; (b) replace the product with the same or a comparable product; or (c) refund the purchase price. All replaced parts and prod- ucts, and products on which a refund is made, become the property of Ignition L.P. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD.

EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

You may contact Ignition L.P. at:

 

 

Ignition L.P., 3102 Maple Ave Suite 450, Dallas, TX 75201

 

02/09

For product support, call 1-866-315-0426.

 

© 2009. Ignition L.P. All rights reserved.

Printed

06A09

Enercell is a trademark used by Ignition L.P.

in China

273-329

Page 1
Image 1
Radio Shack 273-329 warranty UsingYour Adapter, FCC Information, LimitedWarranty

273-329 specifications

Radio Shack 273-329 is a versatile electronic component that has earned a reputation among hobbyists and professionals alike. This particular model is a trusted 9V power supply, primarily catering to various electronic projects and applications, ranging from robotics to DIY electronics.

One of the main features of the Radio Shack 273-329 is its ability to deliver a consistent 9V output, making it suitable for powering a wide array of devices. It typically has a current rating between 500mA to 1A, which allows it to effectively power multiple components at once without experiencing voltage drops. This ensures that projects maintain their performance, even under varying loads.

The design of the 273-329 is compact and user-friendly, featuring a simple plug-and-play setup. Its lightweight build means it is easy to transport, making it an ideal choice for those who frequently work on the go or need to experiment in different locations. Furthermore, the device is equipped with a standard barrel connector, enabling quick and easy connections to various types of equipment and circuits.

In terms of technology, the Radio Shack 273-329 leverages Linear Voltage Regulator technology, ensuring minimal noise and ripple in the output voltage. This characteristic is particularly significant for sensitive electronic circuits where stability and consistent power supply are crucial. Additionally, the power supply is designed with built-in safety features, including short-circuit protection and overload protection, so users can have peace of mind while working on their projects.

The versatility of the Radio Shack 273-329 also lies in its compatibility with a broad range of 9V devices. It can easily power toys, LED strips, sensors, and other DIY projects. This adaptability makes it a staple in many enthusiasts’ toolkits, as it meets diverse power needs without requiring multiple different supplies.

Overall, the Radio Shack 273-329 provides an excellent balance of reliability, safety, and ease of use. It remains a favored option among electronic enthusiasts, effectively bridging the gap between simplicity and functionality. With its stable output and compact design, the 273-329 continues to be a valuable asset for anyone looking to power their electronic creations efficiently.
Top Page Image Contents