RECORDING FROM ANOTHER AUDIO SOURCE
Follow these steps to just record (without adding your voice) from an audio source connected to the sys- tem’s AUX INPUT jack.
1.Load a blank cassette tape, or one that you want to record over, into the cassette compartment.
2.Set POWER to ON to turn on the system. The POWER indicator lights.
3.Set TAPE/AUX on the back of the system to AUX.
4.Press PAUSE, then RECORD on the system. RECORD and PLAY both lock down.
14
5.Start the audio source.
6.Press PAUSE on the system to start recording.
Notes:
•Press PAUSE on the system to temporarily stop recording. Press PAUSE again to resume recording.
•You can listen through the system to the audio source as you record it. Set MASTER VOLUME to a comfortable lis- tening level. The volume set- ting does not affect the recording level.
7.Press STOP/EJECT on the sys- tem to stop recording. RECORD and PLAY release.
8.Turn off the audio source.
