%100'%6+0)"6*'"52'#-'45
You can connect the speakers to any audio source that has a
1.Press POWER to turn the speakers off. Make sure the audio source's power is also turned off.
2.Plug the speakers's
3.Press POWER to turn the speakers back on. Also be sure to turn the audio source’s power back on.
75+0)"6*'"52'#-'45
1.Rotate VOLUME to MIN. If the speakers are connected to a headphone jack, be sure the audio source’s volume is set to its lowest level, then rotate VOLUME to a comfortable listening level.
2.To turn on the speakers, push POWER. The power indicator lights.
3.Turn on the audio source. .#
4.If the speakers are connected to a
5.To enhance the bass or treble sound, adjust BASS or TREBLE until you reach the desired level.
6.Press POWER to turn off the speakers. The power indication turns off. Then turn off the audio source’s power.
%#4'
Keep the speakers dry; if they get wet, wipe them dry immediately. Use and store the speakers only in normal temperature environments. Handle the speakers carefully; do not drop them. Keep the speakers away from dust and dirt, and wipe them with a damp cloth occasionally to keep them looking new. .
5'48+%'"#0&"4'2#+4
If your speakers is not performing as it should, take it to your local RadioShack store for assistance. Modifying or tampering with the speakers’s internal components can cause a malfunction and might invalidate its warranty.
±"016'"±"
•For the best stereo effect, position the speakers apart from each other and facing the center of the listening area.
•Connecting the speakers to a headphone jack usually disconnects any other speaker(s) connected to the audio source.
•If the speakers are connected to a
."%#76+10".
•Setting the audio source's volume too loud can cause sound distortion, damage the speakers, and possibly damage your hearing.
•You might permanently damage your speakers by cleaning them with a vacuum cleaner. Use a feather duster or a soft loose cloth instead.
Connecting the Speakers
3
