5.Connect the wire from the red speaker terminal to the amplifier’s positive (+) terminal, then connect the wire from the black speaker terminal to the amplifier’s negative
nNotes:
Avoid routing the speaker wire near electrical wires.
Do not nail, staple, or otherwise puncture the speaker wire.
Before connecting your speaker to an amplifier, make sure the amplifier and all associated equipment is turned off.
Make sure the impedance of the amplifier matches with the speaker.
3Mounting the Speaker
1.Remove the grille to expose the mounting screws.
2.Be sure the mounting tabs are turned in, allowing the speaker to fit into the hole. Then insert the speaker into the mounting hole.
3.Use the supplied screws to
| tighten the mounting tabs to | Mounting tabs | |
| the wall or ceiling. Be careful |
|
|
| not to overtighten. |
|
|
| 4. Replace the grille. |
|
|
|
|
|
|
|
| ||
|
|