2Connecting speaker wires
Connect the cable leads from the outputs on your amplifier to the input terminal posts on the rear of your loudspeaker cabinet. We recommend you use wire that is
1.Route the speaker wire to the speaker from the amplifier.
2.Separate about 4 inches of speaker wire at each end.
3.Using a wire stripper, remove about ¼ inch of insulation from each wire and twist the exposed ends.
4.Connect the positive marked (usually red) wire to a red speaker terminal by pressing the release tab. Insert the wire into the hole and release the tab. Repeat this procedure for the negative marked wire (usually black) and black terminal.
Strip insulation
1/4’’
1/4’’