Painting the speaker (optional)
Before you connect the speaker wire or mount the speaker, you can paint the frame and grille.
1.To remove the grille, insert a paper clip into one of the grille openings, then pull up.
2.Before you paint the grill, carefully remove the dust cloth.
Frame Grille
3. Before you paint the frame, insert the supplied cardboard paint mask to prevent paint from entering the speaker.
4. After the paint is dry, remove the paint mask, replace the dust cloth, and reinstall the grille.
nNote: Using spray paint will keep paint from blocking grille holes. Do not paint speaker components.
Specifications
Resonance Frequency | ...............................................65 Hz ±20% |
Frequency Response | |
Power Handling | 50W RMS, 100W Max. |
Impedance (nominal) | 8 ohms |
Sensitivity | 87 dB ±3 dB @ |
Tweeter Size | 1 in (25 mm) |
Woofer Size | 6.5 in (165 mm) |
Dimensions (HWD) | 12 × 8.6 × 2.8 in (305 × 218 × 70 mm) |
Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document.
Limited Warranty
Ignition L.P. warrants this product against defects in materials and workmanship under normal use by the original purchaser for one (1) year after the date of purchase. IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES.