Using the Cord Clip
Insert the cord into the cord clip’s hook, then attach the cord clip to your lapel or shirt to position the cord.
OPERATION
Making And Receiving Calls
Before using the phone, put the headset on and adjust it as needed.
To make a call, lift the remote keypad, then press TALK/HANG UP. You hear a dial tone, the TALK/LOW BATT indicator and the IN USE/CHARGE indicator. Dial the desired number.
To answer a call, lift the remote keypad, then press TALK/HANG UP. The TALK/LOW BATT indicator and IN USE/CHARGE indicator.
To disconnect a call, press TALK/HANG UP or place the remote keypad on the base.
Notes:
•When you press a button, a single tone indicates that the phone has accepted the command. Three tones indicate that you pressed a button in error or there is severe interference. If there is severe interference, move the remote keypad closer to the base before you press any key.
•If the interference is severe, the remote keypad might lose
communication with the base and the call might be disconnect. If this happens, return the remote keypad to the base for about 5 seconds to reset the security
Changing Channels
Your phone has an Auto Scan feature that automatically selects a clear channel when you press TALK/HANG UP. If you experience interference during a call, press CHANNEL to switch to another channel until you have good reception.
Setting the Volume
To adjust the volume, lift the remote keypad, press TALK/HANG UP. Then repeatedly press VOLUME 8 or 9. There are four levels. The phone beeps 3 times when you reach the lowest or highest level. The volume level remains set after you hang up.
Using Redial
To quickly redial the last number dialed, lift the remote keypad, press TALK/HANG UP then REDIAL/PAUSE.
To redial a busy number, press REDIAL/PAUSE without returning the phone to the base.
Notes:
•The redial memory holds up to 32 digits, so you can redial long- distance as well as local numbers.
8
