DEL to delete a character. To delete all characters, hold down CH/DEL for at least 1 second.
6.Press SEL. Ijeh[ DkcX[h appears.
7.Enter the number and any tone and pause entries (see “Using Tone Services on a Pulse Line” on
Page 23 and “Entering a Pause”).
±
8.Press SEL. The phone beeps and
C[ceho d Ijeh[Z appears (d = number). After a few seconds, C[ceho Ijeh[ appears, and you can repeat Steps
To replace a stored number, simply store a new one in its place.
'PVGTKPI"C"2CWUG
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number; however, you should also store a pause after the access code to allow the outside line time to connect.
±"016'"±"
Each tone or pause entry uses one digit of memory.
Operation
27
