Operation

±"016'"±"

If you place the handset on the base to recharge it while the headset is connected, be sure the handset seats properly.

You can use a handset holder (available from your local RadioShack store) to hang the handset on your belt for greater convenience when using a headset.

75+0)"#"*'#&5'6

You can make or answer calls with hands-free convenience using an optional headset that has a 3/32-inch (2.5-mm) plug. Your local RadioShack store has a variety of headsets available.

To connect the headset, gently flip open the rubber headset jack cover on the side of the handset, then insert the headset’s plug into the jack. ±ý

Connecting a headset disconnects the handset’s earpiece and microphone.

8or 9 on the handset also controls the headset’s volume.

With a headset connected, you can make or answer calls as usual using the keys on the handset.

When you finish using the headset, disconnect it from the handset and close the rubber cover to protect the jack.

/'/14;"&+#.+0)

You can store up to 10 phone numbers and names in memory, then dial a stored number by entering its memory location number. Each number can be

24

Page 24
Image 24
Radio Shack 43-3535, 43-3544, 43-3545 owner manual 75+0#*#&56, 14&+#.+0