Remote Operation
Ô NOTE Ô
When listening to messages in remote mode, there is a pause during playback every 2 minutes and 40 seconds. Press
#, or ∗ to continue playing the message.
bottom of the system. Enter the security code after the system answers and sounds two tones. Within 7 seconds, enter one of the remote commands.
OPERATING THE SYSTEM FROM A REMOTE LOCATION
Dial your phone number. Even if the system is off, it will turn on and answer after about 10 rings. After the system sounds a tone, enter your remote operation security code. Enter a remote command (see “Remote Commands” on Page 18). When you finish, press 5# to end remote access.
REMOTE COMMANDS
Press | To |
|
|
1# | Play new messages. |
|
|
2# | Play all messages. |
|
|
3# | Delete the current message. |
|
|
4# | Repeat a previous message. |
|
|
5# | Stop and exit. |
|
|
6# | Skip a message. |
|
|
7# | Turn on/off the system. |
|
|
8# | Record an outgoing message. |
|
|
9# | Record a memo. |
|
|
0# | Monitor the room. |
|
|
18
