memory dialing
setting the dialing mode
care and service
You can store up to 20 of your most frequently dialed phone numbers, and dial the number by using one of your memory locations
storing numbers in memory locations
1.Press STORE.
2.Enter the phone number you want to store, including 1+ area code for long distance numbers.
3.Press any of the
4.Use the supplied index cards to record stored numbers.
•You can store up to 16 digits for each number.
NOTES | • If you make a mistake while entering the number, |
| press STORE twice, and then |
| number. |
•To change a number in memory, store a new one in its place.
entering a pause in a memory number
In some telephone systems, you must dial an access code (9, for example), wait for the second dial tone, and then dial the number.
Press OPT/P to enter a
Note: For more information about OPT/P, refer to the section “using OPT/P.”
dialing a memory number
Press the desired location number
chain dialing
You can make a call using more than one of the phone’s memory locations. Chain dialing is useful for dialing special services, such as alternate long distance or
testing stored emergency numbers
If you want to test a stored emergency number (police department, fire department, ambulance), make the test call during the late evening or early morning hours to avoid peak demand periods. Remain on the line to explain the reason for your call.
Switch MODE T/P/TB to T or P to match the type of service you have. If you are not sure which service you have, do this simple test.
1.Set MODE to T.
2.Lift the handset to press SPEAKER and listen for the dial tone.
3.Press any number other than 0.
•If your dial tone stops, you have
•If the dial tone continues, you have pulse service. Set MODE to P.
NOTE: TB is designated for use in the UK.
using tone services on a pulse line
If you have a pulse line, you might need to use tone service for special services, such as
1.Be sure MODE is set to P and dial the number.
2.When the system answers, press . Any additional numbers you press will send a tone signal.
After you hang up, your phone automatically resets to pulse dialing.
•Keep your phone dry; if it gets wet, wipe it dry immediately.
•Use and store your phone only in room temperature environments. Handle your phone carefully; do not drop it.
•Keep your phone away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.
•Modifying or tampering with your phone’s internal components can cause a malfunction and might invalidate its warranty. If your phone is not performing as it should, take it to your local RadioShack store for assistance.
FCC statement
Your phone complies with Part 68 of FCC Rules. You must, upon receipt, provide the FCC registration number and the REN to your telephone company. Both numbers are on the bottom of the phone.
Note: You must not connect your phone to:
•
•most electronic key telephone systems
•
caller ID operation
important safety instructions
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.
If you subscribe to Caller ID service, the phone company sends information about the call between the first and second rings of every call you receive. The phone can also show the name of the caller if you have that service.
If the Caller... | Display Reads |
|
|
Left a message | MSG |
|
|
Called more than once | REPEAT |
|
|
Blocks their number or name | PRIVATE |
|
|
Is not within a Caller ID area | OUT OF AREA |
|
|
Is calling long distance | LONG DISTANCE |
|
|
Note: If the Caller ID record is garbled, LINE�� ERROR appears.
reviewing caller ID records
Each time you receive a call, your phone stores a Caller ID record that you can review later. The record includes the following:
•Call number (1, 2, 3, etc.)
•Caller’s phone number
•Time and date of the call
•Caller’s name (if you have this service)
Repeatedly press REVIEW or to see Caller ID records.
•Your display can show up to 11 digits of a phone number. If the number is longer, the display
NOTES | shows only the last 11 digits. |
•The phone returns to the time/date display after about 20 seconds, if you do not press a key.
©2006. RadioShack Corporation. |
|
All rights reserved. RadioShack and | |
RadioShack.com are trademarks | 10A06 |
used by RadioShack Corporation. | Printed in China |
deleting caller ID records
You can delete individual Caller ID records, or delete all of them after you review them. You cannot delete Caller ID records that have not been reviewed or during a call.
•To remove a single Caller ID record, press DELETE twice.
•To remove multiple records, hold down DELETE until DELETE ALL? appears. Then, press DELETE once. No CALLS appears in the display.
•If you have unread records while holding DELETE, xx NEW CALLS and PLEASE READ display alternately.
Review the records first before deletion.
using OPT/P
Your phone provides dialing options for different phone systems, allow you to select the correct dialing selection for a phone number before you press
CALLBACK.
1.Repeatedly press REVIEW or to find the desired phone number.
2.Repeatedly press OPT/P to select the desired dialing option. You can select one of the following:
•
•
•
using callback
Press CALLBACK to automatically dial the number displayed in the Caller ID display.
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
•Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
•Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
•Do not use the telephone to report a gas leak in the vicinity of the leak.
•Use only the batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode.
Check with local codes for possible special disposal instructions.
troubleshooting
No dial tone — Be sure the handset and phone line cords are securely connected.
Display is blank — Be sure batteries are correctly installed.
Volume drops or sound is distorted — Be sure any other phones are not being used.
Call is noisy — Check to see if the cords are securely connected.
Can receive calls, but cannot make calls — Set MODE
to the correct dialing mode, P or T.
No Caller ID information appears — You have not subscribed to Caller ID service with your phone company.
We have designed your phone to conform to federal regulations, and you can connect it to most telephone lines. However, each phone (and each device, such as a telephone or answering machine) that you connect to the telephone line draws power from the telephone line. We refer to this power draw as the device’s ringer equivalence number, or REN on the bottom of your phone.
If you use more than one phone or other device on the line, add up all of the RENs. If the total is more than five (three in rural areas), your telephones might not ring. If ringer operation is impaired, remove a device from the line.
In the unlikely event that your phone causes problems on the phone line, the phone company can temporarily discontinue your service. If this happens, the phone company attempts to notify you as soon as possible and advises you of your right to file a complaint with the FCC.
Also, the phone company can make changes to its lines, equipment, operations, or procedures that could affect the operation of this telephone. The telephone company notifies you of these changes in advance, so you can take the necessary steps to prevent interruption of your telephone service.
surge protection
Your telephone has
Lightning damage is not common. Nevertheless, if you live in an area that has severe electrical storms, we suggest that you unplug your phone when storms approach to reduce the possibility of damage.
limited one-year warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from RadioShack
RadioShack Customer Relations |
|
300 RadioShack Circle, Fort Worth, TX 76102 | 04/04 |
