Mounting on a Wall
To mount the system on the wall, you need two screws (not supplied) with heads larger than the keyhole slots on the back of the mounting bracket.
Follow these steps to mount the system on a wall.
1.Using the keyhole slots in the mounting bracket as a template, mark the mounting screw loca- tions on the wall.
2.Drill a hole in the wall at each marked location.
3.Thread a screw through each hole, letting the head extend 1/8 inch from the wall.
4.Attach the mounting bracket to the system (see “Attaching the Mounting Bracket” on Page 17).
5.Route the phone line cords through the slots on the back of the bracket.
18
