26
Beyond the Basics
Question Answer
What should I do if I lose
my remote control?
Re-register your complete system
to prevent someone else from using
the lost remote control.
Why do I hear a repetitive
trouble alarm when I try
to arm the system, and it
does not arm?
Check your Security Console’s
display. If a door or a window is
open, the zone # and the problem
displays.
Press disarm. Check each Door/
Window Sensor is working properly
and that no doors or windows are
open. Then, arm the system.
Or:
While the trouble alarm is
sounding, press clear on your
Security Console to bypass the
problem zone (“BYPASSED”
displays.) Then, arm the system
again.
Or, if the display shows
“TAMPER,” check the cover on
your Door/Window Sensor for
that zone.
Or, check that the upper right
lid on your Security Console is
closed.
Why does my Motion
Detector cause false
alarms?
• All brands of motion detectors
sense motion by detecting
a change in temperature.
Therefore, do not place the
detector near any sources of
heat suchas over a heating vent
or an air conditioner.
• Do not place in a direct source of
bright light, such as sunlight.
49-1000 UG.indd 26 7/27/2004 6:49:55 PM