mounting your motion detector
Mount the motion detector so it points slightly downward to obtain maximum coverage.
1.Attach the motion detector to the mounting bracket using the supplied machine screw.
2.Use the supplied mounting screws to mount the motion detector (with bracket) on a wall, about 5 - 6 feet high.
3.Slide 1/2 on the back of the motion detector to 1 for instant triggering and maximum sensitivity, or to 2 to trigger the alarm only after two movements are sensed in the coverage area.
1 / 2
TEST
FCC information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
testing your motion detector
1. Slide 1/2 to 1.
2. Press and hold down TEST until the motion detector’s LED flashes twice, and then release it.
3. Wait 20 seconds, and then walk in front
of the motion detector. Its LED lights when movement is sensed. If necessary, reposition the motion detector for the desired coverage area.
4. Press TEST when you are finished.
©2004. RadioShack Corporation. | |
All rights reserved. RadioShack and | |
RadioShack.com are trademarks | 07A04 |
used by RadioShack Corporation. | Printed in China |
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Consult your local RadioShack store or an experienced radio/TV technician for help.
•If you cannot eliminate the interference, the FCC requires that you stop using your motion detector.
•Changes or modifications not expressly approved by RadioShack may cause interference and void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
limited 90-day warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack
RadioShack Customer Relations
200 Taylor Street, 6th Floor, Fort Worth, TX 76102 04/04