10"#"9#..
1.Using the mounting bracket as a template, mark the location for the two screw holes on the wall.
2.Drill two
3.Use the two supplied screws
to attach the mounting bracket to the anchors.
4. Insert the motion detector into the bracket with the sensing lens facing out.
5.Slide the motion detector's mounting tabs into the bracket's grooved slots until it clicks into place, then rotate the motion detector to the desired angle.
75+0)"6*'"/16+10"&'6'%614
±"016'"±"
When you set CHIME/OFF/ALARM to ALARM, the motion detector does not detect any motion for about 15 seconds to allow you to leave the area. Then, when the sensor detects movement it sounds the siren for about 30 seconds.
1.To use the motion detector to announce someone's presence, set CHIME/OFF/ ALARM to CHIME. When the sensor detects movement, it sounds a pleasant tone and the red indicator lights.
To use the motion detector to detect movement, set CHIME/OFF/ALARM to
ALARM. When the sensor detects
movement within the detection angle, the red indicator lights. Then, it sounds a loud siren after about 15 seconds. The indicator stays lit until you set CHIME/ OFF/ALARM to OFF.
2.To turn off the motion detector, set
CHIME/OFF/ALARM to OFF. The red indicator turns off.
Limited
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety
(90) days from the date of purchase from RadioShack company- |
owned stores and authorized RadioShack franchisees and deal- |
ers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO |
EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, |
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS |
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION |
TO THE DURATION OF THE WRITTEN LIMITED WARRAN- |
TIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, |
RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBIL- |
ITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY |
WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE |
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR- |
MANCE OF THE PRODUCT OR ARISING OUT OF ANY |
BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIM- |
ITED TO, ANY DAMAGES RESULTING FROM INCONVE- |
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR |
PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR |
CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS |
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. |
Some states do not allow limitations on how long an implied war- |
ranty lasts or the exclusion or limitation of incidental or conse- |
quential damages, so the above limitations or exclusions may |
6417$.'5*116+0)
If you have problems with your motion detector, the following chart might help. If you still have problems, take the motion detector to your local RadioShack store for assistance.
2TQDNGO | 2TQDCDNG"%CWUG | 4GOGF[ | |
|
|
| |
Detector does | CHIME/OFF/ALARM set to OFF. | Set CHIME/OFF/ALARM to CHIME or ALARM. | |
Battery low or dead. | Replace the battery. | ||
not sound | |||
|
| ||
when an object | Battery not installed. | Install a new battery. | |
should be | Detection angle incorrect. | Adjust the motion detector’s angle. | |
detected. | |||
Lens window blocked. | Clear the lens window of obstructions. | ||
| |||
|
|
| |
Detection | Lens window is dusty or dirty. | Clean the lens window. | |
range is too | Detection angle incorrect. | Adjust the motion detector’s angle. | |
short. | Detection area too hot, moist, or windy. | Change the motion detector’s location. | |
| |||
Alarm or chime | Battery low or dead. | Replace the battery. | |
is weak. | Siren blocked. | Clear the siren opening of obstructions. | |
|
|
|
not apply to you. |
In the event of a product defect during the warranty period, take |
the product and the RadioShack sales receipt as proof of pur- |
chase date to any RadioShack store. RadioShack will, at its op- |
tion, unless otherwise provided by law: (a) correct the defect by |
product repair without charge for parts and labor; (b) replace the |
product with one of the same or similar design; or (c) refund the |
purchase price. All replaced parts and products, and products on |
which a refund is made, become the property of RadioShack. |
New or reconditioned parts and products may be used in the |
performance of warranty service. Repaired or replaced parts and |
products are warranted for the remainder of the original warranty |
period. You will be charged for repair or replacement of the prod- |
uct made after the expiration of the warranty period. |
This warranty does not cover: (a) damage or failure caused by or |
%#4'
Keep the motion detector dry; if it gets wet, wipe it dry immediately. Use and store the motion detector only in normal temperature environments. Handle the motion detector carefully. Keep the motion detector away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.
5'48+%'"#0&"4'2#+4
If your motion detector is not performing as it should, take it to your local RadioShack store for assistance. Modifying or tampering with the motion detector’s internal components can cause a malfunction and might invalidate its warranty.
attributable to acts of God, abuse, accident, misuse, improper or |
abnormal usage, failure to follow instructions, improper installa- |
tion or maintenance, alteration, lightning or other incidence of |
excess voltage or current; (b) any repairs other than those pro- |
vided by a RadioShack Authorized Service Facility; (c) consum- |
ables such as fuses or batteries; (d) cosmetic damage; (e) |
transportation, shipping or insurance costs; or (f) costs of prod- |
uct removal, installation, |
tion. |
This warranty gives you specific legal rights, and you may also |
have other rights which vary from state to state. |
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, |
Fort Worth, TX 76102
12/99
52'%+(+%#6+105
Detection Coverage | 30 feet (at 20°C) |
Detection Angle | 100 degrees |
Power | DC 9V/500mAh battery |
Standby Current | 180∝A (typical) |
Operating Current | 60mA (typical) |
Alarm Exit Delay Time | 15 sec ± 4 sec |
Alarm Entry Delay Time | 15 sec ± 4 sec |
Alarm Auto Reset Time | 30 sec ± 5 sec |
30 sec – 50 sec | |
Siren Sound | 90 dB/ft. (typical) |
Operating Temperature | 32°F – +104°F (Indoor) |
External Trigger Input | Two Inputs (Normal Close) |
Battery Life (standby) | 3.4 months at 180∝A (typical) |
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.
RadioShack Corporation | |
01A02 | |
Fort Worth, Texas 76102 | Printed in China |