Radio Shack 61-2677C owner manual Setting the MODULE’S Codes

HOUSE CODE

61-2677CD.fm Page 12 Tuesday, July 6, 1999 11:05 AM

•Low-voltage electricity flows through the circuit con- trolled by a switch module, even when the switch is off. This is necessary for proper operation of the switch module. You can completely turn off the electricity by setting the switch’s disable switch to off (left).

Caution: Do not use a wall outlet module to replace an out- let that is controlled by a wall switch.

SETTING THE MODULE’S CODES

Seton all your modules to the same letter as HOUSE CODE on your controller (A through P).

When setting the UNIT CODE, make sure that all modules that are set to the same unit code respond as a group. If you have several modules controlling lights in a single room, set them to the same unit code. (If you set every light module to a different unit code, you might not have enough separate unit codes to complete your system.)

12