Ô NOTE Ô

If you set the clock to vibrate at the alarm time, the clock keeps vibrating even when you open the cover during the alarm time.

Snooze only functions twice in each alarm setting.

While setting the timer, if you do not press any key within about 30 seconds, the clock beeps once and returns to the current time display.

If the countdown timer is running, press

START/LIGHT to stop counting then press SET/ALM to reset the timer to 0:00 00.

If the countdown timer is not running and the display is not set to 0:00 00, press SET/ALM to reset the timer to 0:00 00.

The maximum countdown time you can set is 23 hours, 59 minutes, 59 seconds.

Limited One-Year Warranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from RadioShack company-owned stores and authorized Ra- dioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIA-

BILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. Ra- dioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow in- structions, improper installation or maintenance, alter- ation, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a Ra- dioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) trans- portation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street, 6th

Floor, Fort Worth, TX 76102

12/99

USING THE ALARM

1.Press SET/ALM to turn on the alarm. M appears. Ô

2.To set the clock to vibrate, close the cover after setting the alarm time.

To set the clock to sound alarm beeps, leave the cover open after setting the alarm time.

3.When the clock reaches the preset alarm time, it vibrates or beeps intermittently for about 1 minute then automatically turns off. To silence the alarm sooner, press any key.

If you do not want the alarm to sound or vibrate again the next day, press SET/ALM to turn off the alarm. M disappears.

USING SNOOZE

1.To silence the alarm and snooze for 4

minutes, press UP/SNZ immediately after setting the alarm time. Nappears.

2.When the preset alarm sounds, press any key to temporarily silence the alarm. After about 4 minutes, the alarm sounds (or vibrates if you have closed the cover) for 1 minute then automatically turns off.

To silence the alarm sooner, press any key. Ô

3.To turn off snooze, press UP/SNZ again. Ndisappears.

USING THE COUNTDOWN TIMER

The countdown timer lets you set a specific time to count down from up to 23 hours, 59 minutes, 59 seconds.

1.Press SET/ALM to turn on the alarm. M appears.

2.Repeatedly press MODE until TIMER and 0:00 00 appear. The hour digits flash. Ô

3.Press or hold down UP/SNZ to set the desired countdown hours.

4.Press SET/ALM. The minute digits flash.

5.Press or hold down UP/SNZ to set the desired countdown minutes.

6.Press SET/ALM. The second digits flash.

7.Press or hold down UP/SNZ to set the desired countdown second.

8.Press START/LIGHT to start the countdown timer. The display lights for 3

seconds, TIMER flashes and the timer begins to countdown.

9.To stop the countdown, press START/

LIGHT again. When the timer reaches 0:00 00, it sounds an alarm or vibrates for

1 minute. To stop the alarm sooner, press any key. Ô

USING THE

CLOCK LIGHT

Press START/LIGHT to light the display for about 3 seconds. To light the display continuously, hold down START/LIGHT. When you release it, the light automatically turns off after 3 seconds.

RESETTING

THE CLOCK

If the clock displays segmented digits, does not work properly, or locks up, reset it by using a pointed object, such as a straightened paper clip, to press RESET on the back of the clock.

CARE

Keep the clock dry; if it gets wet, wipe it dry immediately. Use and store the clock only in normal temperature environments. Handle the clock carefully; do not drop it. Keep the clock away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

If your clock is not performing as it should, take it to your local RadioShack store for assistance. Modifying or tampering with the clock’s internal components can cause a malfunction and might invalidate its warranty.

SPECIFICATIONS

Power Source ..........................

Two AAA Batteries

Clock Accuracy ........................

± 0.67 Seconds/Day

Current Drain ................................

Less Than 6 µA

Operating Temperature..........................

32°–104°F

 

 

(0°–40°C)

Battery Life ...................................

About 13 Hours

(Continuously Vibrating)

 

 

Dimensions (Diameter Depth)

....... 31/8 31/32 in

 

 

(80 25 mm)

Weight (without batteries)................

1.83 oz (52 g)

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

 

63-1415

RadioShack Corporation

11A02

Fort Worth, Texas 76102

Printed in China