Radio Shack 85 owner manual Connecting To Your Autosound System, Low Level Input Connections

12-1977.fm Page 8 Tuesday, July 13, 1999 10:07 AM

CONNECTING TO YOUR AUTOSOUND SYSTEM

Low Level Input Connections

You can connect your autosound system’s low-level phono output jacks to the amplifier’s low-level phono input jacks. For the best results, use shielded audio cables, such as Cat. No. 42-2368 (not supplied).

Note: For a cleaner, less noisy signal transfer between your autosound system and the amplifier, the amplifier’s low input phono jacks are gold-plated.

1.Temporarily place the amplifier as close as possible to the selected mount- ing location.

2.If your autosound system has four phono outputs and you are using four speakers, connect the autosound system to the amplifier using audio cables as follows: front-left to CH1, front-right to CH2, rear-left to CH3, and rear-right to CH4.:

8