Radio Shack owner manual Memory Dialing, Transferring a Call Between the Handset and Base

43-5520.fm Page 16 Friday, July 21, 2000 8:01 AM

Transferring a Call Between the Handset and Base

You can use the phone’s intercom feature to transfer a call between the handset and the base.

To transfer a call from the handset to the base, press INTCM. The call is placed on hold, and Paging Base and Hold appear.

When the person at the base answers, press TALK. The call is released from hold and transferred to the base. To return to handset use, press TALK or INTCM.

To transfer a call from the base to the hand- set, press INTCM/PAGE. The call is placed on hold, and Paging and Hold appear. When the person with the handset answers, press SPEAKER. The call is released from hold and transferred to the handset. To return to the base use, press SPEAKER or INTCM/PAGE.

MEMORY DIALING

You can store up to 30 numbers in memory (20 in the handset’s and 10 in the base’s memory), then dial a stored number by pressing a memory location number.

You can also store a name with each number in the handset’s memory.

Use the supplied memory directory sticker to record your stored numbers. Peel the back- ing from the sticker and attach it to the base’s handset cradle.

Storing a Number in the Handset’s Memory

Notes:

•The phone beeps five times and exits the storing process if you wait more than 20 seconds between each keypress.

•If you receive a call during memory entry, the phone exits the storing pro- cess.

Follow these steps to store a number in the handset’s memory.

1.Lift the handset.

2.Hold down MEM until Memory Store and a list of memory location numbers appear.

3.Press a number (01–20) or press VOL/ CID 8 or 9 to choose a two-digit mem- ory location. Precede a single digit loca- tion number with 0 — 01, 02, 03, and so on.

4.To store a name, press SELECT/CHAN- NEL. Store Name appears.

If you do not want to enter a name, skip to Step 6.

5.To enter a name, press VOL/CID 8 or 9 to select the characters. Press 6 or 7 to move the cursor left or right.

Repeatedly press VOL/CID 9 to view the characters in alphabetical order. (The display shows uppercase letters first, then lowercase letters, numbers, and special characters.)

Notes:

•Press VOL/CID 8 to see the charac- ters in reverse alphabetical order.

•You can hold down VOL/CID 8 or 9 to scroll rapidly through the charac- ters.

•If you make a mistake, move the cur- sor over the error, then enter the cor- rect character, or press DEL to delete a character. To delete all the charac- ters, hold down DEL for at least 1 sec- ond.

16 Operation