Radio Shack owner manual Using Speakerphone, Using Hold, Using Mute, Using Redial

Models: 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting ID

1 24
Download 24 pages 42.43 Kb
Page 14
Image 14

43-5520.fm Page 14 Friday, July 21, 2000 8:01 AM

Once you set the volume level, the setting is maintained even after you hang up the phone.

Note: When you press VOL/CID 8 while the volume is maximum or VOL/CID 9 while the volume is low, the setting does not change and the phone beeps three times.

During the call, one person can hang up and another person can continue the call at the other keypad. Or, both people can hang up at the same time to end the call.

Note: If you hear a high-pitched noise from the base’s speaker, the handset and the base are too close together.

USING THE

SPEAKERPHONE

To make or answer a call using the speaker- phone, press SPEAKER. The SPEAKER indi- cator lights. When you hear a dial tone, dial the number.

To set the speakerphone’s volume, slide VOLUME on the right side of the base.

To end a speakerphone call, press SPEAKER again.

USING HOLD

Press HOLD to put a speakerphone call on hold. The HOLD indicator lights. While a call is on hold, you can make an intercom call (see “Using Page/Intercom” on Page 15) be- tween the handset and the base without dis- connecting the call.

To release a call from hold, lift the handset and press TALK, press SPEAKER or HOLD on the base, or pick up any extension phone on the same line.

Switching Between the Handset and Speakerphone

To switch to the speakerphone while you are using the handset, press SPEAKER on the base. When you hear the conversation or dial tone on the speakerphone, press TALK on the handset.

To switch to the handset while you are using the speakerphone, simply lift the handset off the base. If the handset is away from the base, press TALK, then press SPEAKER.

Using Both the Handset and Speakerphone

If someone else is using the speakerphone, press TALK on the handset to join the con- versation.

If someone else is using the handset, press SPEAKER on the base to join the conversa- tion.

USING MUTE

While talking on the speakerphone, you can temporarily turn off the phone’s microphone by pressing MUTE so the other party cannot hear you. The SPEAKER indicator flashes.

Press MUTE or SPEAKER to resume your conversation.

Note: If the phone is close to loud noises while you are using the speakerphone, the phone might not switch to let you hear the person on the other end of the line. If this happens, press MUTE to turn off the micro- phone so you can hear the caller. Press MUTE again to speak.

USING REDIAL

You can quickly dial any of the last three numbers you dialed recently on the handset. Lift the handset and repeatedly press RDL/ PAUSE until the number you want to dial dis-

14

 

Operation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 14
Image 14
Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting ID Using Hold