Radio Shack AM/FM Stereo Auto Reverse Cassette Recorder owner manual

14-729.fm Page 10 Wednesday, June 30, 1999 5:27 PM

Notes:

•Press PAUSE to temporarily stop playback. Press PAUSE again to resume playback.

•Press to fast-forward, or

to rewind the tape to the desired location.

•Press DIRECTION to reverse the tape’s direction and play the other side.

5.Adjust VOLUME MIN/MAX for the desired listening level.

6.Adjust TONE LOW/HIGH for the desired sound.

7.Set E-BASS OFF/ON to ON to emphasize low frequency sounds. Set it to OFF for normal bass sound.

8.Press STOP/EJECT to com- pletely stop playback before it automatically stops. Press STOP/EJECT again to open the cassette compartment and remove the cassette tape.

10

RECORDING

You can record from the radio, or use the built-in microphone to make a live recording.

Caution:

•Before you load a cassette tape for recording, be sure its erase- protection tabs are in place. If you force down RECORD when that side’s erase-protection tab is missing, you can damage the record mechanism (see “Pre- venting Accidental Erasure”).

•The SCR-99 records only when the tape is turning forward. After loading a cassette tape, press RECORD to see if the tape is turning forward. You cannot press RECORD if the tape is turning in reverse. If necessary, press DIRECTION to change the tape’s direction. Do not force down RECORD.

Notes:

•The SCR-99’s Automatic Level Control (ALC) automatically adjusts the recording level. VOL- UME MIN/MAX has no effect on recording.

•To record on the other side of the tape, remove the tape, turn it over, and load it again.