OPERATION
1.Turn VOL clockwise to turn on the transceiver.
ILLUSTRATION
2.Select Channel A or B using the CHANNEL switch on the top of the transceiver.
ILLUSTRATION
3.To conserve battery power, set POWER to LO. If the person you transmit to has trouble receiving your signal, set POWER to HI.
ILLUSTRATION
4.To transmit, hold down
5.When you finish your message, release
6.Adjust VOL to a comfortable listen- ing level.
7.If you are not using CTCSS, wait until there is no signal on the chan- nel, then slowly turn SQL/CTCSS clockwise until the background noise stops.
Note: Do not turn SQL/CTCSS too far clockwise because you might cut out weak signals.
If you are using CTCSS (see “Why Use CTCSS?” on Page 11), turn SQL/CTCSS counterclockwise until it clicks.
8.To turn off the transceiver, turn VOL counterclockwise.
10