CONNECTING AN
ANTENNA
Attach the flexible antenna to the anten- na jack on top of the transceiver. Place the antenna connector’s slots over the antenna jack’s tabs, squeeze the base of the antenna, and push down and turn the connector until the antenna locks into place.
Warning: When installing or removing a base station antenna, use extreme cau- tion. If it starts to fall, let it go! It could contact overhead power lines. If the an- tenna touches the power line, contact with the antenna, mast, cable, or guy wires can cause electrocution and death! Call the power company to re- move the antenna. Do not attempt to do so yourself.
ILLUSTRATION
Instead of the supplied antenna, you can connect an optional antenna. The BNC antenna jack on your transceiver makes it easy to use with a variety of antennas, such as an external mobile antenna or an outdoor base antenna.
Caution: Never connect an antenna that is not specifically tuned for the transceiver’s frequency range.
USING AN EXTERNAL MICROPHONE
An external microphone can make it easier to use the transceiver when you clip it to your belt. Plug the microphone’s cable connector into the MIC jack on top of the transceiver. This automatically disconnects the transceiver’s micro- phone.
Note: The transceiver’s
9
