15-1916b.fm Page 24 Monday, July 19, 1999 12:17 PM

IF YOU HAVE PROBLEMS

MANUAL CODE SEARCH

If the 3 in 1 does not control your remote-con- trolled devices when you first set it up, you prob- ably did not enter the correct 3-digit codes for your devices.

You can try all the codes for the brand of your de- vice, or because many manufacturers make prod- ucts using several different brand names, you might want to search the 3 in 1’s entire library by following these steps.

1.Manually turn on the device you are trying to set up.

2.Aim the 3 in 1 at the device.

3.Press the device key, then hold down P until the red indicator blinks twice. Release P.

4.Press 9 9 1 PWR, then press the device key. Alternate between pressing PWR and the device key until the device responds.

Each time you press the device key, the 3 in 1 advances to the next manufacturer’s code in its list.

5.When the device responds, press and release P to lock in the manufacturer’s code. The red indicator blinks twice.

If necessary, repeat these steps for each device.

DETERMINING THE 3-DIGIT CODE

After you set up your 3 in 1 remote control using the manual code search, you can find which 3- digit code the 3-1in-1 is set to by following these steps.

1.Press the device key you want to get the manufacturer’s code from.

Need help? Call 1-800-955-2599

24

Page 24
Image 24
Radio Shack Easy Remote owner manual If YOU have Problems, Manual Code Search, Determining the 3-DIGIT Code