Radio Shack ET-1105 owner manual Connecting and Charging the Battery Pack

43-1105.fm Page 9 Monday, August 30, 1999 1:57 PM

6.Plug the adapter into a standard AC outlet.

7.Raise the base’s antenna to a verti- cal position.

CONNECTING AND CHARGING THE BATTERY PACK

The ET-1105 comes with a rechargeable nickel-cadmium battery pack in the handset but not connected. Before using your phone, you must connect the bat- tery pack and then charge it for about 16 hours.

1.Press down and slide off the com- partment cover as shown.

2.Plug the battery pack’s connector into the socket in the compartment. The connector fits only one way.

Note: For easier battery pack con- nection, lift it out of the compart- ment, insert its connector into the socket, then replace the battery pack inside the compartment.

3. Replace the cover.

To charge the battery pack, place the handset on the base. The CHARGE indi- cator on the base lights.

Recharge the battery pack when and LOW BATTERY appear on the handset’s display.

9