43-1018.fm Page 7 Tuesday, August 17, 1999 8:53 AM
I
5.nsert the supplied AC adapter’s barrel plug into the 12V DC jack on the back of the base. Then route the adapter’s cord through the right slot on the base’s bottom and under the clips as shown. Plug the adapter into a standard AC outlet.
6.Plug the short modular cord into the wall plate’s jack.
7.Align the bracket’s keyhole slots with the wall plate studs and slide the base downward to secure it.
8.Press and lift out the handset holder. Rotate the holder 180° as shown, and then snap it back into place so it holds the handset.
Note: If you later want to mount the base on a desktop, press PUSH and slide the bracket down to remove it from the base’s bottom.
7
