Radio Shack ET-596 owner manual Placing the Base on a Desk Top

43-696a.fm Page 7 Friday, August 13, 1999 12:48 PM

Placing the Base on a Desk Top

Follow these steps when you place the base on a desk, shelf, or table.

1.If you have a single 2-line modular jack, plug one end of the supplied modular cord into the TEL LINE 1/2 jack.

Note: When you make this con- nection, you should not connect another modular cord to the TEL LINE 2 jack or phone operation will be erratic.

If you have two separate 1-line modular jacks, plug one end of the supplied modular cord into the TEL LINE 1/2 jack and plug another modular cord (not sup- plied) into the TEL LINE 2 jack.

If you have only one 1-line modu- lar jack, plug one end of the sup- plied modular cord into the TEL LINE 1/2 jack to use line 1, or to the TEL LINE 2 jack to use line 2.

2.Plug the supplied AC adapter’s barrel plug into the DC IN 9V jack.

3.Route the adapter’s cord through the strain relief slot.

Strain Relief Slot

4.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.

7