OPERATION
RADIO OPERATION
•BAND SELECTION
At radio mode, press BAND button (13) to select the desired band.
The reception band will change in the following order:
FM1 
FM2 
FM3 
AM1 
AM2 
•STATION SELECTION
-Manual Tune Up/Down Repeatedly press the
TUNE/TRACK/SKIP 
button (16) or TUNE/TRACK/SKIP
button (17) for manual tuning frequency downward or upward.
-Seek Tune Up/Down Press and hold the
TUNE/TRACK/SKIP 
button (16) or TUNE/TRACK/SKIP
button (17) for several seconds for auto tuning frequency downward or upward.
•LOCAL/DISTANT
Press LOC button (1) shortly to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations. In local mode, “LOC” will display.
•MONO/STEREO
At FM radio mode, press MO/ST button (8) to set the reception between mono mode and stereo mode. In stereo mode, when stereo broadcasting station is received, the “ 
” indicator will appear upon the display.
•AUTOMATIC MEMORY STORING & PRESET SCAN
-Automatic Memory Storing Press AS/PS button (14) over 1 second in radio mode, Auto Store is started. Stations are searched automatically from next frequency and detected station is stored into the preset memory. In case of LOC state, the first Auto Store is done by LOC state and if 6 CH is not fully
memorized, the seconds Auto Store search continued by Distant state. At the end of Auto Store operation, mode is change to Preset Scan.
-Preset Scan
Press AS/PS button (14) shortly in radio mode, Preset Scan is started. This operation starts from next preset number and finished at the same preset number of which last channel memory stored. Frequency of preset memory is displayed with blinking for 5 seconds. Press AS/PS button (14) again to release this function.
•STATION STORING
Press and release any one of the preset buttons (18) (1 - 6) shortly,
(1 - 6) preset memory is called (Preset Call). Press the button for several secnds, current frequency is stored into preset memory and preset number (1 - 6) is displayed (Preset Store).
CASSETTE OPERATION
•PROGRAM BUTTON
These two buttons (25) perform the dual functions of changing the direction of tape playback and fast forward/rewind of the tape.
-Change Tape Playback Direction Press both buttons together to play the other side of a tape.
-Fast Forward/Rewind
Press the button with the double arrows pointing the same direction as the direction indicator in the LCD to fast forward; press other button in the opposite direction to fast rewind.
•EJECT
Push the eject button (24) down to eject the cassette tape.
•CASSETTE COMPARTMENT
Insert a cassette tape into the cassette compartment (26). The cassette mechanism will load it in play mode.
7
