PRO-27 20-Channel Programmable Scanner
(200-0507) Searching For Active Frequencies
SEARCHING FOR AND STORING ACTIVE FREQUENCIES
You can set your scanner to search for transmissions:
Within any one of the seven
You can select these bands using the number keys 1-7.
1: 29 | - 54 MHz | 5:406 - 450 MHz |
2:l37 - 144 MHz | 6:450 - 470 MHz | |
3:144 - 148 MHz | 7:470 - 512 MHz | |
4:148 - 174 MHz |
|
Starting from a band where you have stored a frequency (DIRECT SEARCH).
Follow these steps to search for active frequencies.
1.While the scanner is stopped, enter the channel number where you want to either:
Store a frequency the scanner finds while searching any of the seven preprogrammed bands.
Replace a stored frequency with another frequency the scanner finds while searching the same band as the stored frequency.
NOTE: When you enter a
2.Press MANUAL then
Start BAND SEARCH by entering the number of the frequency band you want to search. The scanner searches starting from the selected
band's lowest frequency.
Start DIRECT SEARCH by pressing 8/DOWN ARROW to search downward or 9 UP ARROW to search upward. The scanner searches the band that contains the channel you selected.
NOTES: If you do not start band search or direct search while K/L, L/O, and WX flash on the display, the scanner automatically searches the previously searched band.
When the scanner searches upward, the display segments cycle clockwise. When the scanner searches downward, the display segments cycle counterclockwise. While searching, the
selected band number (BAND SEARCH) or d (DIRECT SEARCH) briefly appears at each cycle.
To change the frequency band, simply select the desired band
1