20-511.fm Page 11 Wednesday, August 4, 1999 2:13 PM
1.Connect the adapter’s blue-tipped barrel plug to the adapter’s cord and set the barrel plug’s tip to positive.
2.Insert the adapter’s blue-tipped barrel plug into your scanner’s
POWER jack.
Note: If you installed rechargeable nickel-cadmium batteries in the scanner, remove the plastic cap from the CHARGE jack and put the cap in the POWER jack. Connect the AC adapter to the CHARGE jack. This powers the scanner and recharges the batteries at the same time. See “Charging Nickel-Cadmium Batteries” on Page 13.
3. Plug the adapter’s power module into a standard AC outlet.
11
