3.To change the search direction, press t to search downward or s to search upward. b, SRCH, and t or s appear on the display.
4.When the scanner stops on an active frequency, you can do one of the following:
•To store the displayed frequency into the monitor memory, press MON/0. MON appears on the display.
•To continue the search, press t or s.
•To hold the frequency, press HOLD/BAND. H appears on the display. To continue the search, press and hold t or s for about 1 second. Or, you can press HOLD/BAND to continue the search. The scanner briefly displays the frequency band (if you pressed HOLD/BAND), then resumes searching.
Notes:
•If you want to step through the frequencies while H is displayed, press t or s.
•If you tune to a search skip frequency, L appears on the display. See “Search Skip Memory” on Page 24.
•If you want to change the frequency band, repeatedly press HOLD/BAND. The selected frequency band is displayed.
Direct Search
You can search up or down for more frequencies from the currently dis- played frequency.
1.Press MANUAL.
2.Use the number keys and CLEAR/• to enter the frequency (includ- ing the decimal point) where you want to start the search, or enter the channel number containing the starting frequency and press
MANUAL.
3.Press t to search downward or s to search upward from the selected frequency. d, SRCH, and t or s appear on the display.
4.When the scanner stops on a transmission, you can do one of the following:
•To store the displayed frequency into the monitor memory, press MON/0. MON appears on the display.
23
