Radio Shack PRO-93 Delay Function in ID Indication Mode, Reviewing Locked-Out Talk Group IDs

1.Press TEXT while the scanner is receiving the voice channel and indicating the text name. The ID code

appears as )+0è444444 or ! è4444.

2.Press TEXT again to cancel.

Delay Function in ID Indication Mode

You can set the ID delay function separate from the channel delay.

1. Press FUNC then ./DELAY while you are program-

ming the trunked ID. 1J<ý1Gó FNEýB<PJýKFýJ<Ký% ;<C8P.ýðôòýJ<:FE;J appears.

2. Press 8or 9 to select *FE<, òôí, ñôò, ñôí, ðôò, ðôí,

ïôò, ïôí or îôò J<:FE;J.

3. Press ENTER.

Note: When activated, ID delay watches the control channel command for the delay time when the signal disappears from the voice channel.

Reviewing Locked-Out Talk Group IDs

Note: You cannot clear all lockouts from a talk group at the same time.

1.Press PGM then TRUNK.

2.Press FUNC then L/OUT. The locked out ID appears. If the ID memory bank has no locked out ID, you hear the low beep tone.

3.Press FUNC then 8 or 9 to select a search bank. Or, just press 8 or 9 to search for any locked out IDs in a bank.

Clearing Talk Group IDs

1.Press PGM then TRUNK.

2.Press FUNC, 8 or 9 to select ID memory.

3.Press FUNC then CL.

62 Trunking Operation