Radio Shack PT-990A Basic Operation, DVD/CD AUX/STEREO LINE IN iPod MD TUNER TAPE, PHONES jack

BASIC OPERATION

1.Press the Main Power ON/OFF Switch on the rear panel to ON.

2.Press the Power On button on the front panel to switch on the unit.

3.Select the desired source by pushing the corresponding button

-DVD/CD

-AUX/STEREO LINE IN

-iPod

-MD

-TUNER

-TAPE

-USB(1.1 format only)

-Digital in

this button is use to select below inputs as follow

COAX 1 COAX 2OPT 1OPT 2

PHONES jack

For private listening, insert optional (not included) headphones (1/4-inch plug) into the PHONES jack, and then the center and surround speaker will be cut automatically. iPod in jack

The input ports are for iPod player. It can connect a iPod player directly or connect to a iPod docking. Balance/Bass/Treble control knob

BALANCE control is used to adjust the level of speaker . BASS control is used to adjust the level of the low frequency sound range.

TREBLE control is used to adjust the level of high frequency sound rang.

USB

USB 1.1 format port, can connect a USB stick or connect a MP3 music player directly. When connect a MP3 player, you can use the remote to achieve the follow function: PLAY,

PAUSE, STOP, SKIP, PREVIOUS

Speaker channel selection

IF you want one section speaker work and another section stop, press SPEAKER A/B button on the front panel or on the remote control.

If you want two section speakers work together, press Speaker A+B button on the front panel or on the remote control

12