REPLACING THE FUSE
Follow these steps to check the sys- tem’s fuse and replace it if it has blown. The system uses a
×
Fuse
Fuse Holder 
1.Push together the two halves of the inline fuse holder (on the red power wire) and twist them to separate the halves.
2.Inspect the fuse. If the wire is bro- ken or missing, replace the fuse.
Caution: Use only a fuse of the same type and rating. Using a dif- ferent type of fuse or bypassing the fuse protection can damage your alarm or your vehicle’s elec- trical system.
3.Put the new fuse in the holder and push and twist the holder’s halves together.
REPLACING THE REMOTE CONTROL’S BATTERY
If your remote control’s range is re- duced or if the indicator does not light when you press a button, replace its battery. The remote control uses a
1.Snap apart the remote control’s case.
Caution: Take care not to lose any of the remote control’s pieces.
2.Replace the battery with a new one.
3.Put all parts back in place and snap the case halves back together.
Need Help? Call | 13 |
