Radio Shack Surge Protector owner manual 124#6+10, 6417$.5*116+0, 548+%#0&42#+4

±"016'"±"

When you are not using the surge protector, press POWER so it pops up to turn off the surge protector. The PROTECTED WHEN LIT, and ON indicators turn off.

."%#76+10".

Retain Instructions— Retain the safety and operating instructions for future reference.

Damage — Unplug this appliance from the wall outlet and replace it:

•When the power cord or plug is damaged.

•If liquid has been spilled or objects have fallen into the appliance.

•If the appliance has been exposed to rain or water.

•If the appliance has been dropped or damaged in any way.

•When the PROTECTED WHEN LIT indicator fails to light.

12'4#6+10

Press POWER to turn on the surge protector.±

Your connected devices are protected when the PROTECTED WHEN LIT and ON indicators light.

If any of the indicator lights fail, see “Troubleshooting”.

75+0)"6*'"5#('6;"5.+&'" %18'4

Your surge protector is equipped with safety slide covers on each of its seven AC sockets. Slide the cover up to protect each unused AC socket.

75+0)"6*'"+0&+%#6+10"6#)5

Your surge protector comes with pairs of indication tags to identify which device’s power cord is connected to which AC socket. Stick a large color tag on the power cord at the rear of the device and the same color small tag next to the surge protector’s target AC socket.

6417$.'5*116+0)

Condition

The PROTECTED WHEN LIT and ON indicators turn off, and RESET pops out.

Solution

Your surge protector received a current that exceeded its capacity due to overload. When this happens, the 15-amp circuit breaker (located on the side of the case) trips to prevent possible damage, and RESET pops out. To reset the surge protector, disconnect one or more of the connected devices and allow the surge protector to cool down. Then push RESET in.

Condition

The PROTECTED WHEN LIT and ON indicators turn off, and the surge protector sounds an alarm.

Solution

Your surge protector's AC line is no longer protected from surges and power is not allowed to pass beyond the alarm. When the surge protector receives an unusually strong surge, the built-in protection absorbs the surge to protect your equipment. If the surge is strong enough, it diminishes the protection circuitry’s ability and the surge protector sounds an alarm. If the PROTECTED WHEN LIT and ON indicators will not light, replace the surge protector..

%#4'

Keep the surge protector dry; if it gets wet, wipe it dry immediately. Use and store the surge protector only in normal temperature environments. Handle the surge protector carefully; do not drop it. Keep the surge

protector away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

5'48+%'"#0&"4'2#+4

If your surge protector is not performing as it should, take it to your local RadioShack store for assistance. Modifying or tampering with the surge protector’s internal components can cause a malfunction and might invalidate its warranty.

2