BOXLIGHT 12SF Turn on your TV tuner, If necessary, adjust the height of the projector. See page

8Turn on your TV tuner.

•The TV image should display on the projection screen. If it doesn’t, press the source button on the keypad or the video button on the remote to display your TV image (press the button until “S-video” appears in the corner). You can select a default source to determine which source the pro- jector examines first during power-up for active video; see “Default Source” on page 45.

•If necessary, adjust the height of the projector. See page 28.

•If necessary, adjust the zoom or focus of the image by turn- ing the rings around the lens. See page 27.

•If you are projecting on a 4:3 screen, change the screen aspect to 4:3. See page 35.

•If necessary, make adjustments to the image using the pro- jector’s on-screen menus. To open the menus, press the menu/select button on the keypad or remote, then select the Display or Image sub-menu. For more information about the menus, see page 33.

•If the image is not square, use the keystone buttons on the remote to adjust the image’s shape. See page 31.

•If you connected the audio cables to the projector, use the volume buttons on the keypad to adjust the volume. If you connected the audio cables from your tuner to your receiver, use the receiver’s volume control.

The projector is compatible with these major broadcast video standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and SECAM. It automatically adjusts to optimize its performance for the incoming video. The input signals for SECAM, PAL-M, PAL- N, andPAL 60 video are similar to other video signals and cannot be automatically detected, therefore they must be chosen manu- ally. See page 41.

13