BOXLIGHT 12SF manual HDTV, Video 3-Component, Video

S e t t i n g u p t h e P r o j e c t o r

NOTE: If you have turned Auto Source off (page 45), you may need to press the source button more than once to display an active source. The sources switch in this order: PC 1-Analog, PC 1-Digital, Video 3-Component

HDTV, Video 3-Component, Video

1S-Video, Video 2-Composite, PC 2-Component, and PC 2-Analog.

NOTE: Monitor out is only available for analog computer, 480p, and HDTV sources.

The module connects to the projector via the projector’s com- puter connector. Slide the tabs in the module into the grooves on the back of the projector, then press the computer connector into the projector. To remove the module, press down all the way on the textured lever on the top left of the module to release the latch, then slide the module off.

FIGURE 9

Connecting the connectivity module to the projector

The module provides two computer and three video inputs (see page 63 for a list of sources and audio/video connectors). The module also provides monitor out (used to display images on your desktop computer’s monitor as well as on the projection screen), and RS-232 input (to control the projector from an LCD control panel).

8