BOXLIGHT 12SF manual If your TV tuner has composite video output

S e t t i n g u p t h e P r o j e c t o r

If your TV tuner has composite video output:

1Plug the A/V cable’s round yellow connector into the com- posite “video-out” connector on your tuner (Figure 14). This connector may be labeled “To Monitor.”

2Plug the other yellow connector into the yellow composite connector (labeled video 2) on the projector.

A/V cable

FIGURE 14

Connecting the projector to a TV tuner using the audio video (A/V) cable

3If you want sound from the projector’s speakers, plug the A/ V cable’s white connector into the left “audio out” connector on your tuner. Plug the cable’s red connector into the right “audio out” connector on the tuner.

4Plug the A/V cable’s other white connector into the white “audio L” connector on the projector. Plug the cable’s other red connector into the red “audio R” connector on the projec- tor.

5Follow steps 5-8 starting on page 12.

If your TV tuner has component video output:

Connect the component cable (not included) to the appropriate connectors (labeled video 3) on the projector and on your tuner. Your local electronics store should carry these cables.

14