BOXLIGHT 12SF manual If your video device has composite video output, composite video cable

S e t t i n g u p t h e P r o j e c t o r

If your video device has composite video output:

1Plug the A/V cable’s round yellow connector into the com- posite “video-out” connector on your video device (Figure 17). This connector may be labeled “To Monitor.”

2Plug the other yellow connector into the yellow composite connector (labeled video 2) on the projector.

composite video cable

FIGURE 17

Connecting the projector to a video player using the audio video (A/V) cable

3If you want sound from the projector’s speaker, plug the A/V cable’s white connector into the left “audio out” connector on your video device. Plug the cable’s red connector into the right “audio out” connector on the video device.

4Plug the A/V cable’s other white connector into the white “audio L” connector on the projector. Plug the cable’s other red connector into the red “audio R” connector on the projec- tor.

5Follow steps 5-10 starting on page 16.

18